top of page
Technical samples
Design Sheet • Sewing Sequence • Spec Sheet
OVERVIEW
Below are some samples of pages in a technical package.
Sewing Sequence Guide
Style number: BBYRGLN1
BABY DOLL W/RAGLAN SLEEVE
Pattern Piece | Seam Allowance | Sewing Order |
|---|---|---|
Bodice (1a) Front | one-half | Connect the 2 front bodice pieces (1a/1b) together at the waistline.
|
Bodice (1b) Front | one-half | |
Bodice (2a) Back | one-half | Connect the 2 front bodice pieces (2a/2b) together at the waistline.
|
Bodice (2b) Back | one-half | |
Bodice Front (1a & 1b) | one-half | Connect one of the side seams together. Use French seam. Repeat for other side.
Attach elastic to 1/2" seam allowance at the waist.
|
Bodice Back (2a & 2b) | one-half | |
Raglan Sleeve F | one-half | |
Raglan Sleeve B | one-half | French seam the front and back raglan sleeve pieces (all 4 pieces). |
Raglan Sleeves (L & R) | one-half | Connect the raglan sleeves to the bodice. Left and Right. Use French Seam. |
Bodice Piece | ||
Bias-Binding | Attach the bias-binding on the neckline of the garment. Edge stitch together. | |
Bodice w/Sleeves | one-half | Hem bodice and sleeves. Use double stretch stitch. |
CHALLENGES
& solutions
Putting together a technical package without a physical sample has its challenges. It is much easier when there is a sample to go off of. Using measurements from similar garments and other garments that are finished, is helpful in achieving results for a new one that has yet to be created.
bottom of page